Deanta Wall Panelling

“The Edwardian”

New to the Deanta range “The Edwardian” wall panelling. Really revamp your room withDeanta’s simple, elegant and affordable wall panelling. Not only is “The Edwardian” wall panelling inexpensive and can save you considerable time, it is also easy to install (see wall panelling leaflet for installation instructions).

Complements the Deanta range of quality doors, skirtings, architraves and door hardware.

Single pack of wall panelling comes with

1 x (2420mm x 36mm x 30mm) length of large (top) beading
4 x (2420mm x 80mm x 18mm) lengths of board panelling
4 x (2420mm x 28mm x 30mm) lengths of (inside) beading


Step 1

Carefully measure and align your top border. This is the most important step as it will frame the rest of your wall panelling making it quick and easy to install.

Step 2

Once you have made sure that the top border is in the correct position you can go ahead and use your nail gun to nail it to the wall.

Step 3

From here you can use a section from one of the panels as a spacer and mark the outline of where the beading should be placed.

Step 4

Using two sections on beading will ensure that you are the correct distance from the top and side of each section of panelling.

Step 5

Once you are happy with the placement of the beading you can go ahead and use your nail gun to nail the beading to the wall.

Step 6

Continue until all 4 sides of the beading are nailed in place using the section of panelling to ensure all sides are level.

Step 7

Repeat step 1 – 6 until you have completed the whole section of wall.

Step 8

Finished Result.